A whole mastering rack in one plugin, from the first saturator to the tape print.
VST3 · AUIn development
Development build · ELEMENT skin · click to enlarge
From our studio to yours. Element Master follows the order of the analog mastering rack Eric Brody uses on his own records. See the rack it came from ↓
Element Plugin Series · 01
A whole mastering rack in one plugin
What it does
Element Master is ten original rack units in one vertical rack: saturation, three kinds of compression, an enhancer, three equalizers, a quarter-inch tape deck and a mastering limiter. The signal runs top to bottom, like the hardware. Fold what you aren’t using, drag units into a new order, and print to tape.
Who it’s for
Producers and mix engineers finishing their own records who want an analog-style mastering chain in one window, and engineers who want each piece on its own as a Pure Element.
Fold any unit. A folded unit keeps its main knobs with live values, its meter or EQ curve and its power switch, so the whole chain fits on one screen.
Rearrange the chain. Drag a unit to a new place in the rack and the audio follows, with no click.
Compare honestly. Bypass plays your unprocessed mix at the same loudness as the master, and A / B holds two settings side by side.
Deliver. A true-peak guard, loudness and correlation meters, and dither for 24- and 16-bit files are built in.
Skins. ELEMENT plus 19 looks, with HUES to recolour them; the faceplates stay the same.
Your keys. Arrow keys step any control (Shift fine, Option six steps), Delete resets, Cmd+Z undoes.
Skins
Same rack, your look
A skin dresses the top bar, title strip and frame around the rack. The unit faceplates stay as they are.
Ocean Drive. One of the 19 looks.Mondo Sundown. The frame changes; the faceplates don’t.
The whole rack
Unfolded, top to bottom
The v0.3.6 rack with every unit open, as it ships on the E2 House Chain preset.
Every unit open. Master I/O, then Nitro through Oxygen, Lithium, and the Krypton 115 deck at the bottom.The graph in the rack. Mercury’s four bands open right under the unit.
Pure Elements
Every unit, one at a time
Pure Elements is the family name for Element Master’s ten units. Here is each one: what it does, what you can turn, and when to reach for it.
Nitro SaturatorPure Element Nitro Saturator
What it doesTape-style saturation with texture and a wet/dry mix.
ControlsTrim, Saturation, Emphasis, 15 or 30 ips head bump, Dual, 2nd, Cream and Auto, Texture, Mix (dry to wet) and Output; drive and level meters.
Reach for it whenFirst in the chain on a mix that feels thin or too clean: a little saturation adds density before anything compresses it.
Carbon Opto LevelerPure Element Carbon Opto Leveler
What it doesA stereo optical leveler that rides the level gently, with a slow, program-dependent release.
ControlsGain, Peak Reduction, Compress / Limit, HF emphasis on the side-chain, stereo Link, Mix; two VU meters reading gain reduction, +4 or +10.
Reach for it whenSmoothing a mix bus or a full mix by a couple of dB without hearing the compressor work.
Titan Bus CompPure Element Titan Bus Comp
What it doesA stereo bus compressor for glue and punch.
ControlsThreshold, Ratio (1.5 to LIM), Attack, Release (to Auto), Make-up, Mix, side-chain high-pass and G-FORCE; gain-reduction meter.
Reach for it whenGluing drums, a mix bus or a master: slow attack and auto release for the classic bus-comp lift.
Cobalt Tube CompPure Element Cobalt Tube Comp
What it doesA tube program compressor with two cells: opto, or variable-mu with a ratio that rises as it compresses.
ControlsInput, Threshold, Ratio, Attack, Release, Output, Mix; Cell (Opto / Mu), Timing (Fix / Man / F+M), side-chain high-pass, Link; two VU meters.
Reach for it whenThickening a master or a bus with slow, musical tube compression.
Neon EnhancerPure Element Neon Enhancer
What it doesA program enhancer with two dynamic bands: low-end weight and focus, top-end shine and width.
ControlsBass (round to square), Bass Comp, Lo-Mid, Clarity, Heat; Width, High Comp, Hi-Mid, Shine; overload light.
Reach for it whenA dull or boxy master that needs focus in the low end and air on top, used a little at a time.
Hydro Inductor EQPure Element Hydro Inductor EQ
What it doesA three-band inductor-style equalizer for broad, musical tone shaping.
ControlsHPF 80; LF 35 to 220 Hz (shelf or peak); Mid 200 Hz to 6 kHz with Hi-Q; HF at 8 or 16 kHz (shelf or peak); ±15 dB; response curve.
Reach for it whenBroad moves on a mix: a touch of low end at 60 Hz, a dip in the mids, a lift at 16 kHz.
Mercury Program EQPure Element Mercury Program EQ
What it doesA program equalizer with a passive-style boost-and-cut section and a four-band section you can draw on a graph.
ControlsPassive section: low boost and attenuation (the classic bump-and-dip), high boost with bandwidth, high attenuation, a Stage switch (SS / Tube). Four bands with gain and Q, shelves at the ends, low cut with slope, high cut. GRAPH opens the bands under the unit.
Reach for it whenFinal tonal balance on a master: the low-end bump-and-dip, then precise moves on the graph.
Oxygen Bax EQPure Element Oxygen Bax EQ
What it doesA broad shelving equalizer with low and high cuts.
ControlsLow Cut (to 54 Hz), Low Shelf (74 to 364 Hz), Low and High (±5 dB), High Shelf (1.6 to 18 kHz), High Cut; response curve.
Reach for it whenTilting a whole mix brighter or warmer by a dB or two, and clearing sub rumble.
Lithium LimiterPure Element Lithium Limiter
What it doesA mastering limiter with a true-peak ceiling and loudness metering.
ControlsInput, Ceiling, Release with Auto, Refine, Warmth; three engines (Clean / Analog / Punch); LUFS target buttons (−14 to −6); Link (Auto / Linked / Dual); Match; momentary, short-term and integrated LUFS with true peak.
Reach for it whenBringing a master up to level for release while watching LUFS and true peak.
Krypton 115 TapePure Element Krypton 115 Tape
What it doesA quarter-inch tape deck for the final print.
ControlsRecord Level, Output, Bias, Wow & Flutter, Hiss, Speed (3¾ / 7½ / 15 ips), Formula (Classic / Hi-Out / Long); record VUs. The Pure Element adds a transport with Start Speed and Stop Speed for tape starts and stops.
Reach for it whenPrinting a master to tape as the last step, or for tape stops and starts on a track.
Each picture is that unit as its own plugin window (v0.3.6). In the current development build each unit is built as its own plugin, “Pure Element <name>” (VST3 + AU), from the same code, so it sounds the same as in the rack. How Pure Elements will be offered hasn’t been decided. Planned, not built yet: an empty rack you fill yourself, and a separate category of Vocal Bus modules.
Eric Brody’s personal analog mastering rack.
From our studio to yours
Built on a real rack
Element Master grew out of Eric Brody’s own mastering workflow. This is the rack he masters with, and the plugin follows its order, from the first saturator to the limiter, with a quarter-inch print on his Akai deck at the end.
Each unit is an original e2Audio design, voiced after the behaviour of the hardware it stands in for in that chain. Two factory presets start from his setup: E2 House Chain, and Eric’s Rack + SM911 Print 7-1/2, the house chain into his favourite tape at 7½ ips.
Compatibility
What it runs on
Formats: VST3 and AU. Development builds are universal (Apple silicon and Intel) and need macOS 12 or newer.
Checked so far: Apple’s AU validator and pluginval pass on development builds; testing in Ableton Live is under way.